scroll and find out more...
Soil cultivation - Row dependent soil cultivation | GF 200
2-row rotary hiller resp. full width tiller for cultivation of vegetable and potatoes
The rotary tiller type GF 200, mounted in the rear or in the front of the tractor, is suitable as a full width tiller for an optimum seedbed preparation for the cultivation of various vegetables and potatoes. An ideal prepared seedbed is the prerequisite for optimum development of the seed resp. planting tubers. Through intensive soil cultivation, root crop ground preparation is perfectly achieved so that undisturbed growth of the crop can be guaranteed. For conventional hilling (in a second working step) the rotary tiller GF 200 can be modified to be used as a rotary hiller with rear attachment at the tractor. The machine can be converted from independent rows to a full width tiller with a few simple steps. When attached to the front of the tractor, the GF 200 can be perfectly combined with a potato planter at the rear side of the tractor. The drive is designed for a tractor output up to 165 HP.
- Please select...
- Highlights
- Benefits
- Images / video clips
- Configuration
The ideal seedbed
Through intensive soil cultivation, root crop ground preparation is perfectly achieved so that undisturbed growth of the crop can be guaranteed.
The ideal combination
The GRIMME Rotary Tiller GF 200 with front attachment, is ideally suited to be combined with a trailed or mounted 2-row potato planters. Convenient especially for short headlands and smaller acreage, a compact tractor implement combination is available for these requirements.
Even deep guidance
The large carriage roller ensure an even working depth.
Preparatory work
Ridge shaper with integrated formers that prevent loosened soil from being compacted by the tractor wheels.
Combined plant protection
GRIMME tank system TS 420 on the rotary hiller GF 200 at tractor front. Authorized for liquid chemicals to be applied onto the seed potatoes and/or into the furrow
Suitable for very stony soils
Rotor shaft with extra stable spikes for very stony conditions.
Video: The rotary tiller GF 200 at work
Benefits
- General benefits:
- Full width tilling for an optimum seedbed preparation for potatoes or other vegetables
- Special rotor shaft with spikes for stony conditions
- Special rotor shaft with tines, called "S-Blades", for very heavy soils or soils with a high content of organic material
- Rotor shaft with S-blades for working in of organic substance
- Gearbox for up to 165 HP tractor power
- GF 200 front attachment:
- GF 200 can be used as a full width tiller for bed tilling and ridge pre-shaping
- When mounted on the front of a tractor the machine works great in combination with a rear mounted potato planter. The combination of soil cultivation and planting in a single pass can significantly reduce running costs and ground compaction.
- The GRIMME tank system TS 420 is optionally available for the rotary tiller GF 200 in front attachment (2 x 200 l, consider the tractor lifting power)
- GF 200 rear attachment:
- GF 200 as rotary hiller in rear attachment for conventional ridge hilling
- lifting frame for seeder (e.g. carrots, celery etc.) soil preparation and seeding in one working step reduce the working time and driving over the field
- ridge shaping in various sizes, optimum adaption to the cultivation conditions
- soil loosening tines between the ridges rear of the shaping board for a better water absorption
- Even depth guidance also in changing conditions, via support wheels in front of the rotary tiller
- guiding disc for stabilisation on slopes
Specifications
You'll find all the information about the standard features of the machine here.
Configuration
- GF 200 front attachment:
- working width 1.50 m (row width 75 cm), full width tiller
- rotor shaft with 64 tines with additional welded wear protection (50 x 12 mm)
- Height adjustable carrying roller in front of the rotary tiller
- three-point linkage Cat. 2
- Walterscheid drive shaft with friction clutch and 6 grooves
- gearbox, 350 rpm, single drive for max. 165 HP
- side gearbox with spur gears in it´s own housing
- ridge shaper with centre shaper for ridge pre-shaping
- GF 200 rear attachment:
- row width 75 cm, rotary hiller
- rotor shaft with 32 tines with additional welded wear protection (50 x 12 mm)
- 2 infinitely height adjustable support wheels for depth control
- shaping board for bulbous ridges
- shaping board pressure adjustment via springs
- Manual levelling adjustment of the shaping board via spindles
- three-point linkage Cat. 2
- Walterscheid drive shaft with friction clutch and 6 grooves
- gearbox, 350 rpm, single drive for max. 165 HP
- side gearbox with spur gears in it´s own housing
Technical data
GF 200
Dimensions | |
---|---|
Length | 2350 mm |
Width at row width 75 cm | 1790 mm |
Width at row width 90 cm | 2090 mm |
Height | 1450 mm |
Weight | |
Empty weight with basic configuration | 1400 kg |
Working width | |
Working width | 1,5 - 1,8 m |
Row width | 75 - 90 cm |
Number of rows | 2 |
Tractor attachment | |
Lower linkage category | 2 Cat. |
Drive | |
Input speed p.t.o.-shaft | 1000 rpm |
Rotor speed | 350 rpm |
Soil cultivation | |
Tine rotor diameter | 740 mm |
Number of tines | |
Rotor shaft for hilling the ridges | 44 |
Rotor shaft with full-width setup | 68 |
Tractor requirements | |
Engine power (min.) | 50 kW |