scroll and find out more...
Harvesting Technology - BM - series | BM 300
6-row, efficient, maintenance friendly
The defoliator type BM 300 is a six-row trailed defoliator equipped with a steel flail shaft and two cleaning shafts. The machine is mainly used in a so-called two-phase harvesting process for beets, chicory roots and celeriac. The leaf is chopped at full width of the machine and deposited Inline between the (beet) rows. Row widths between 45 cm and 50 cm resp. 18" and 20" available for the BM 300.
Category:
- Please select...
- Highlights
- Benefits
- Images / video clips
- Configuration
Clean defoliating
The steel flail shaft and the two counter-rotating cleaning shafts ensure a perfectly defoliated crop.
Simple and effective:
Low maintenance drive of the shafts, using v-belts on the r/h and l/h-side of the machine.
Benefits
- Clean chopped leaves are the basic for a good start into the harvest.
- Clean removing of weed between the rows
- Reliable defoliating by use of one steel flail shaft and two counter rotating cleaning shafts with rubber flails.
- Avoids blockages in the harvester and give clean harvested crop
Specifications
You'll find all the information about the standard features of the machine here.
Configuration
- Selectable row width of 45 to 50 cm, resp. 18 to 20 inch
- Tractor attachment via drawbar with mechanical drawbar adjustment
- Full width flail shaft with spiral arranged steel flails
- First and second cleaning shaft over the beet rows consist of napped rubber flails. They are manually adjustable to the required row width.
- The depth control is effected at the front by means of a lifting cylinder with a spindle-adjustable end stop. At the rear a spindle-adjustable castor wheels is used.
- Power transmission via PTO shaft 1000 rpm.
- 4 wheels, type 7.50-20 TR 15 AS
Technical data
BM 300
Dimensions | |
---|---|
Length | 5600 mm |
Width | 3300 mm |
Channel width | 2930 mm |
Height | 1600 mm |
Weight | |
Empty weight with basic configuration | 2600 kg |
Bearing load | 1100 kg |
Working width | |
Row width | 45 - 50 cm |
Row width | 18 - 20 " |
Number of rows | 6 |
Tractor attachment | |
Low hitch | x |
Drawbar eye below | x |
Drive | |
Input speed p.t.o.-shaft | 1000 rpm |
Flails / scalper unit | |
Wide shredder | 2855 mm |
Shredder diameter | 690 mm |
Wheels | |
Number of wheels | 4 |
Wheels | 5.50-16 |
Tractor requirements | |
Engine power (min.) | 60 kW |
Engine power (recommended w/o hydr. drive) | 90 kW |
Required control valves (single acting) | 1 |